System Backup
10 - 334
10.1.2 Storage medium
For the backup of the YRC1000 system, the SD card or the USB memory is used (The USB
connector of the programming pendant is not available in the automatic backup function).
The following tables show the recommended SD card and USB memory.
In order to save the batch data, the following free space per file is needed in the media.
• Approx. 30M Byte
Note that the free space to store the two files is needed when using the automatic backup
function.
Also, it is recommended to store the backup data in two or more media cards to minimize
problems if the media is damaged.
NOTICE
The water-proof function of the Pendant is not effective while the USB memory is
connected.
If USB memory is connected constantly, there is a risk it drops off.
Use SD card if there is no measures to maintain water-proof function or to prevent USB
memory from dropping off.
<Recommended SD card>
No. Manufacturer Model Capacity
1 Hagiwara Solutions NSD6-512MH(A01SDI-YE) 512 MB
2 Hagiwara Solutions NSD6-001GH(A01SDI) 1 GB
3 Hagiwara Solutions NSD6-002GH(A01SDI) 2 GB
4 Hagiwara Solutions NSD6-004GH(B20SEI) 4 GB
5 Hagiwara Solutions NSD6-008GH(B20SEI) 8 GB
6 Hagiwara Solutions NSD6-016GH(B20SEI) 16 GB
7 Hagiwara Solutions NSD4-032GH(B00MG) 32 GB
<Recommended SD card>
No. Manufacturer Model Capacity
1 Hagiwara Solutions UDG4-*xGDRJS 1GB, 2GB, and 4GB are
available.
“x” indicates
“1” for “1GB”,
“2” for “2GB”
“4” for “4GB”.
To Next Page
Loading...
