EasyManua.ls Logo

YASKAWA MOTOMAN YRC1000 - 10.5 Error

YASKAWA MOTOMAN YRC1000
454 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Backup
10 - 354
10.5 Error
Er-
ror
No.
Dat
a
Message Cause
0770 * During robot or station opera-
tion.
The automatic backup would not work
when the robot or a robot is in motion.
3390 * File not found The file to be loaded no longer exists.
3460 * Cannot backup the media
1 Insufficient capacity of the SD card
2 Cannot access the SD card
3463 * Cannot store the backup data.
The value specified for
STORED FILE SETTING ex-
ceeds the maximum number
Confirm that the value specified for
STORED FILE SETTING does not ex-
ceed the maximum number.
3501 * Check the media insertion. Cannot access the SD card
3550 * Under automatic backup oper-
ation. Operate after the back-
up is completed.
The automatic backup window cannot be
called to display while the automatic
backup is being processed.
3551 * Under automatic backup oper-
ation. Operate \“SORT FILE\”
after the backup is completed.
The file arrangement can not be operated
during the automatic backup operation.
3560 * Failed in sorting backup file. Failed to re-arrange the backup file for
another reason than the access to SD
card.
3580 * Under backup file access. Op-
erate after the access is com-
pleted.
To display another window and then dis-
play the automatic backup window again
after "ARRANGE" operation, “AR-
RANGE” process should be completely
finished.
3581 * Under backup file access. Op-
erate \“SORT FILE\” after the
access is completed.
The previous "ARRANGE" process
should be completely finished to perform
the next "ARRANGE" operation.

Table of Contents

Related product manuals