Security system
8 - 73
Tab. 8-2: Menu and SECURITY mode
ARC WELDING ARC START COND. Operation Edit
ARC END COND. Operation Edit
ARC AUX COND. Operation Edit
POWER SOURCE COND. Operation Edit
ARC WELD DIAG. Operation Edit
WEAVING Operation Edit
ARC MONITOR Operation Edit
ARC MONITOR (SAMPL) Operation -
APPLI COND. Management Management
HANDLING HANDLING DIAGNOSIS Operation Edit
SPOT WELDING WELD DIAGNOSIS Operation Edit
I/O ALLOCATION Management Management
GUN CONDITION Management Management
SPOT POWER SOURCE
COND.
Management Management
APPLICATION CONDITION
SETTING
Management Management
SPOT WELDING
(MOTOR GUN)
WELD DIAGNOSIS Operation Edit
GUN PRESSURE Edit Edit
PRESSURE Edit Edit
I/O ALLOCATION Management Management
GUN CONDITION Management Management
CLEARANCE SETTING Operation Edit
SPOT POWER SOURCE
COND.
Management Management
TIP INSTALLATION Operation Management
APPLICATION SETTING Management Management
GENERAL WEAVING Operation Edit
GENERAL DIAG. Operation Edit
COMMON TO
ALL APPLICA-
TIONS
I/O VARIABLE CUSTOMIZE Operation Operation
1. Only in TEACH mode
2. Only in PLAY mode
3. Displayed if function to restore JOBs is enabled. *You 'll find additional information for the menu and the
security mode in a activated functional safety in the following English manual "OPTIONS INSTRUCTIONS FOR
FUNCTIONAL SAFETY BOARD OPERATION".
Main menu Sub menu Permitted security mode
DISPLAY EDIT
To Next Page
Loading...
