YASKAWA MOTOMAN YRC1000 - Page 74

Security system
8 - 74
Changing the security mode:
1. Select {SYSTEM INFO} from the main menu.
The sub menu appears.
NOTICE
The icons for the main menu, like the arc welding system, depend on the system used.
2. Select {SECURITY}.
The selection window for the security mode appears.
3. Press [SELECT] and select SECURITY MODE.
4. Enter the user ID.
The user ID input window appears.
The user ID is set as follows in the factory:
EDITING MODE : [0000000000000000]
MANAGEMENT MODE : [9999999999999999]