Security system
8 - 75
5. Press [ENTER].
The user ID entered is compared with the user ID of the selected security mode. If the
user ID entered is correct, the security mode is switched.
Procedures to change the mode to the ONE TIME MANAGEMENT MODE:
1. Change to the MANAGEMENT MODE.
When changing to the management mode, security mode can be selected from
“OPERATION MODE”, “EDITING MODE”, “MANAGEMENT MODE”, “SAFETY MODE”
or “ONE TIME MANAGE MODE”.
2. Select “ONE TIME MANAGE MODE”.
A character string input keypad is displayed. Input the one time security code, which is
issued by YASKAWA sales representative.
If the password is correct, the security mode will be changed.
SAFETY MODE : [5555555555555555]
To Next Page
Loading...
