System Setup
9 - 91
1. Select {ROBOT} from the main menu.
– The submenu appears.
2. Select {TOOL}.
1) Move the cursor to the desired tool number, and press {SELECT} in the "tool list"
window.
2) The tool coordinate window of the selected number appears.
– In the tool coordinate window, the tool number can be changed by pressing the page
button or {PAGE}.
– To call the tool list window and the tool coordinate window, press {DISPLAY} {LIST}
or {DISPLAY} {COORDINATE DATA}.
3. Select the desired tool number.
4. Place the cursor in the section for registering the coordinates, and then press
[SELECT].
– The number can be entered.
5. Enter the coordinates.
To Next Page
Loading...
