3.2 Function Modules
3.2.5 Data Logging
3-74
15.
Click the OK Button.
The Sampling and Trigger Dialog Box closed.
16.
Click the Start Button in the Logging 1 Dialog Box.
Logging starts. While logging is in progress, the following items are displayed in the Logging 1 Dialog
Box.
• File update counter
• Latest record number
• Latest folder name
• Latest file name
17.
Click the Stop Button in the Logging 1 Dialog Box.
Logging will stop.
The following table gives the range of each data and the timing at which logging is reset.
Click the Cancel Button to return to the Logging 1 Dialog Box without registering the
settings.
Data Name Range Reset Timing
File Name
When the saving destina-
tion is set to USB memory
logging00001 to
logging10000
The file name resets to logging00001
when the power supply is turned ON.
If a file already exists in memory, it will be
overwritten.
When the saving destina-
tion is set to built-in RAM
disk
logging00001 to
logging4000
Latest record
number
0 to 18,446,744,073,709,551,615
The latest record number is reset to 0
when logging starts after a stop.
To Next Page
Loading...
