YASKAWA SGMAH - Page 281

Sigma II User’s Manual Chapter 7: Using the Digital Operator
7 - 11
Parameter settings are displayed in two patterns as shown below.
Since each digit in the function selection parameters has its own meaning, the value
can only be changed for each individual digit. Each digit can only display a value
within its own permitted range.
Definition of Display for Function Selection Parameters
Each digit of the function selection parameters has a unique meaning.
For example, the rightmost digit of parameter Pn000 is expressed as “Pn000.0”.
• Each digit of the function selection parameters is defined as shown below. The
parameter displayed below shows how the digits in the display are assigned.
Display Application Display Format
Function selection Hexadecimal display for each digit
Parameters setting Decimal display in five digits
Distribution of parameter digits
Designation Meaning
Pn000.0 Indicates the value entered at the 0 digit of parameter Pn000.
Pn000.1 Indicates the value entered at the 1 digit of parameter Pn000.
Pn000.2 Indicates the value entered at the 2 digit of parameter Pn000.
Pn000.3 Indicates the value entered at the 3 digit of parameter Pn000.
1 digit
0 digit
2 digit
3 digit