Properties - Siemens S7- Connection
Siemens NetPro FB55 - IP_CONFIG
IP respectively MAC address remote
station
SUB_IP_V4.rem_IP.IP_0...IP_3 resp.
SUB_MAC.rem_MAC.MAC_0...MAC5
Local ID Connection ID
Address details
Siemens NetPro FB55 - IP_CONFIG
Local rack SUB_S7_C_DETAILS.LocalRack
Local slot SUB_S7_C_DETAILS.LocalSlot
Local resource SUB_S7_C_DETAILS.LocalResource
Remote rack SUB_S7_C_DETAILS.RemoteRack
Remote slot SUB_S7_C_DETAILS.RemoteSlot
Remote resource SUB_S7_C_DETAILS.RemoteResource
As soon as the Block_VIPA_HWK (special identification 99) is contained in the DB, all
connections, which were parameterized in the NETPRO, are still remain. Now it is pos-
sible to change with IP_CONFIG only the system data (IP, Netmask etc.). If the special
identification Block_VIPA_HWK were found, no other connecting data may be parameter-
ized in the DB, otherwise error is announced in the RETVAL. If the Block_VIPA_HWK is
not in the DB, then all connections are removed from NETPRO (as with Siemens) and the
connections from this DB are only configured.
As soon as the Block_VIPA_BACNET (special identification 100) is contained in the DB, a
BACNET configuration is derived from the DB and no further blocks are evaluated there-
after.
Additional Parameter
fields
Block_VIPA_HWK
Block_VIPA_ BACNET
Block_VIPA_IPK
VIPA SPEED7
Network Communication
Ethernet Communication > FB 55 - IP_CONF - Progr. Communication Connections
HB00 | OPL_SP7 | Operation list | en | 18-30 178
To Next Page
Loading...
