n FB 870 - VMC_KernelSigma5_EC
– The Kernel block communicates with the drive via the appropriate bus system,
processes the user requests and returns status messages.
– Specific block for Sigma-5 EtherCAT.
– The exchange of the data takes place by means of the axis DB.
n FB 860 - VMC_AxisControl
– General block for all drives and bus systems.
– Supports simple motion commands and returns all relevant status messages.
– The exchange of the data takes place by means of the axis DB.
– For motion control and status query, via the instance data of the block you can
link a visualization.
– In addition to the FB 860 - VMC_AxisControl, PLCopen blocks can be used.
n FB 800 ... FB 838 - PLCopen
– The PLCopen blocks are used to program motion sequences and status queries.
– General blocks for all drives and bus systems.
Programming
1. Go to the service area of www.vipa.com.
2. Download the Simple Motion Control library from the download area at ‘VIPA Lib’ .
3.
Open the dialog window for ZIP file selection via ‘File è Retrieve’.
4. Select the according ZIP file and click at [Open].
5. Specify a target directory in which the blocks are to be stored and start the unzip
process with [OK].
Open the library after unzipping and drag and drop the following blocks into
‘Blocks’ of your project:
n Sigma-5 EtherCAT:
– UDT 870 - VMC_ConfigSigma5EC_REF
– FB 870 - VMC_KernelSigma5_EC
– FB 871 - VMC_InitSigma5_EC
n Axis Control
– UDT 860 - MC_AXIS_REF
– Blocks for your movement sequences
1.
In your project, click at ‘Blocks’ and choose ‘Context menu è Insert new object
è Organization block’.
ð
The dialog ‘Properties Organization block’ opens.
2. Add OB 57, OB 82, and OB 86 successively to your project.
Include library
Copy blocks into project
Create interrupt OBs
VIPA SPEED7
Motion control - Simple Motion Control Library
Usage Sigma-5/7 EtherCAT > Usage Sigma-5 EtherCAT
HB00 | OPL_SP7 | Operation list | en | 18-30 316
To Next Page
Loading...
