9. Navigate in the hardware catalog to the directory ‘PROFINET IO
è Additional field devices è I/O è VIPA ...’ and connect the IO device ‘013-
CCF0R00’ CPU to your PROFINET system.
ð
In the slot overview of the PROFINET IO device ‘VIPA SLIO CPU’ the CPU is
already placed at slot 0. From slot 1 you can place your System SLIO modules.
1. Open the properties dialog by a double-click at ‘VIPA SLIO CPU’ .
ð
The VIPA specific parameters may be accessed by means of the properties
dialog.
2. Select at ‘Function X3’ the value ‘PTP’ .
Enable PtP functionality
VIPA SPEED7
Motion control - Simple Motion Control Library
Usage inverter drive via Modbus RTU > Usage in Siemens SIMATIC Manager
HB00 | OPL_SP7 | Operation list | en | 18-30 475
To Next Page
Loading...
