1 Ethernet PG/OP channel
Device overview
Module ... Slot ... Type ...
PLC ... 2 CPU 315-2 PN/DP
MPI/DP interface 2 X1 MPI/DP interface
PROFINET inter-
face
2 X2 PROFINET interface
... ... ...
CP 343-1 4 CP 343-1
... ... ...
13.5.6.2.3 Hardware configuration System SLIO CPU 014 ... 017
To be compatible with the Siemens SIMATIC TIA Portal the following steps should be
executed:
1. Start the Siemens TIA Portal with a new project.
2. Switch to the Project view.
3. Click in the Project tree at ‘Add new device’ .
Add CPU in the project
VIPA SPEED7
Motion control - Simple Motion Control Library
Usage inverter drive via Modbus RTU > Usage in Siemens TIA Portal
HB00 | OPL_SP7 | Operation list | en | 18-30 492
To Next Page
Loading...
