17.27 Statistics information to OBs - SSL-ID: xyFAh
This partial list contains statistical information about the OBs
(additionally OB 60 and OB 61).
Content Value Description
SSL_ID 00FAh All statistical information for OB xx
(5 record sets with 24bytes)
01FAh Response time: time between the request and the start of execution
02FAh Process image of the inputs (only relevant for OBs are assigned a process image)
03FAh OB execution time: included alarm interrupts
04FAh Process image of the outputs (only relevant for OBs are assigned a process image)
05FAh Processing time: Time for an execution cycle of request until the completion of pro-
cessing follow up
0FFAh SSL partial list header information
INDEX xx00h Statistical information for all used OBs (additionally OB 60 and OB 61)
xx3Ch Statistical information for OB 60
xx3Dh Statistical information for OB 61
LENTHDR 0018h One record set is 12words long (24byte)
N_DR xxxxh Number of record sets
– The times must be specified in
µ
s
– During startup, the times are reset to zero - without minimum times.
– The minimum times are assigned with the value FFFFh.
Description
Header
VIPA SPEED7
SSL System status list
Statistics information to OBs - SSL-ID: xyFAh
HB00 | OPL_SP7 | Operation list | en | 18-30 996