YASKAWA VIPA SPEED7 - Page 997

SSL-ID: 01FAh
The data set includes the response time. This is the time between the request and the
start of execution. This time also includes a process input image.
INDEX
offset
Length Value Description
0 1byte 01h Number of partial list: SSL Sub ID
1 1byte xxh OB Number: statistical information for OB xx
(INDEX see above)
2 1word xxxxh reserved
4 2words xxxxxxxxh Minimum execution time: The smallest measured time
8 2words xxxxxxxxh Maximum execution time: Maximum measured time
12 2words xxxxxxxxh Last run time: Last measured time
16 2words xxxxxxxxh Average execution time: The time is determined by the last 1000 recorded
times.
20 2words xxxxxxxxh reserved
– The times must be specified in µ s
– The measurement of time starts with the first transition from Startup
to RUN.
SSL-ID: 02FAh
The data set includes the time taken to create the process image of inputs. Only relevant
for OBs which a process image is assigned.
INDEX
offset
Length Value Description
0 1byte 02h Number of partial list: SSL Sub ID
1 1byte xxh OB Number: statistical information for OB xx
(INDEX see above)
2 1word xxxxh reserved
4 2words xxxxxxxxh Minimum execution time: The smallest measured time
8 2words xxxxxxxxh Maximum execution time: Maximum measured time
12 2words xxxxxxxxh Last run time: Last measured time
16 2words xxxxxxxxh Average execution time: The time is determined by the last 1000 recorded
times.
20 2words xxxxxxxxh reserved
– The times must be specified in µ s
– The measurement of time starts with the first transition from Startup
to RUN.
Record set
Record set
VIPA SPEED7
SSL System status list
Statistics information to OBs - SSL-ID: xyFAh
HB00 | OPL_SP7 | Operation list | en | 18-30 997