SSL-ID: 03FAh
The data set contains the execution time of the OBs. This is the time between the start of
the OBs until leaving the OB including all alarm interrupts and SFC operations. The time
from a higher priority OB is executed by a synchronous or asynchronous error is counted
with.
INDEX
offset
Length Value Description
0 1byte 03h Number of partial list: SSL Sub ID
1 1byte xxh OB Number: statistical information for OB xx
(INDEX see above)
2 1word xxxxh reserved
4 2words xxxxxxxxh Minimum execution time: The smallest measured time
8 2words xxxxxxxxh Maximum execution time: Maximum measured time
12 2words xxxxxxxxh Last run time: Last measured time
16 2words xxxxxxxxh Average execution time: The time is determined by the last 1000 recorded
times.
20 2words xxxxxxxxh reserved
– The times must be specified in
µ
s
– The measurement of time starts with the first transition from Startup
to RUN.
SSL-ID: 04FAh
The data set includes the time for creating the process image of outputs. Only relevant for
OBs which a process image is assigned.
INDEX
offset
Length Value Description
0 1byte 04h Number of partial list: SSL Sub ID
1 1byte xxh OB Number: statistical information for OB xx
(INDEX see above)
2 1word xxxxh reserved
4 2words xxxxxxxxh Minimum execution time: The smallest measured time
8 2words xxxxxxxxh Maximum execution time: Maximum measured time
12 2words xxxxxxxxh Last run time: Last measured time
16 2words xxxxxxxxh Average execution time: The time is determined by the last 1000 recorded
times.
20 2words xxxxxxxxh reserved
Record set
Record set
VIPA SPEED7
SSL System status list
Statistics information to OBs - SSL-ID: xyFAh
HB00 | OPL_SP7 | Operation list | en | 18-30 998
To Next Page
Loading...
