YASKAWA YASNAC XRC - Clearing Interference Area Data

3.7 Interference Area
3-29
3.7.4
Clearing Interference Area Data
*1
Select the desired signal number for clearing using the page key or by number
input.
The method for number input is as follows: Move cursor to the signal number and press
[ENTER] to display the number input line. Input desired signal number and press
[ENTER].
*2
The confirmation dialog is displayed.
*3
All the data of the signal are cleared.
Select interference signal for clearing
*1
Select {DATA} under the menu Select
{CLEAR DATA}
*2
Select “YES”
*3
Operation
Explanation
INTERFERENCE AREA
INTERFERENCE SIG: 1
METHOD :AXIS INTERFERENCE
CONTROL GROUP :R1
CHECK MEASURE :FEEDBACK POSITION
< MAX > < MIN >
S 510 0
L 1004 0
U 213 0
R 10 0
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L
Initialize?
YES NO
INTERFERENCE AREA
INTERFERENCE SIG : 1
METHOD : AXIS INTERFERENCE
CONTROL GROUP : **
CHECK MEASURE : COMMAND POSITION
< MAX > < MIN >
!
DATA
EDIT DISPLAY UTILITY
R1
S
C
L