YASKAWA YASNAC XRC - Checking the Order Number

1.2 Checking the Order Number
1-2
1.2
Checking the Order Number
Check that the order number of the manipulator corresponds to the XRC. The order number is
located on a label as shown below.
Fig. 1 Location of Order Number Labels
(a) XRC (Front View) (b) Manipulator (Top View)
Label(Enlarged view)
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER. No.
¨¨¨¨¨¨
Check that the manipulator
and the XRC have the
same order number.