2.1 Transporting Method
2-1
2
Transporting
2.1
Transporting Method
2.1.1
Using the Crane
As a rule, when removing the manipulator from the package and moving it, a crane should be
used. The manipulator should be lifted using wire rope threaded through attached eyebolts.
Be sure the manipulator is fixed with jigs before transporting, and lift it in the posture as shown
in " Fig. 2 Transporting Position ".
Fig. 2 Transporting Position
• Sling applications and crane or forklift operations must be performed by
authorized personnel only.
Failure to observe this caution may result in injury or damage.
• Avoid excessive vibration or shock during transporting.
The system consists of precision components, so failure to observe this caution may
adversely affect performance.
CAUTION
4
×
M10 Eyebolts
(Provided at factory)
To Next Page
Loading...
