YASKAWA YASNAC XRC - 3.17 File Initialize; Initialize Job File

3.17 File Initialize
3-93
3.17
File Initialize
3.17.1
Initialize Job File
*1
Initializing objects are shown.
*2
The confirmation dialog is displayed.
*3
Job data is initialized.
Turn the power supply ON while pressing [TOP MENU] simultaneously Change the
security mode to management mode Select {FILE} under the top menu Select {INI-
TIALIZE}
*1
Select “JOB”
*2
Select “YES”
*3
Operation
Explanation
INITIALIZE
JOB
FILE/GENERAL DATA
PARAMETER
I/O DATA
SYSTEM DATA
!Maintenance Mode
Item marked by
"
can not be
selected.
INITIALIZE
JOB
FILE/GENERAL DATA
PARAMETER
I/O DATA
SYSTEM DATA
!Maintenance Mode
Initialize?
YES
NO