YASKAWA YASNAC XRC - Initialize Data File

3.17 File Initialize
3-94
3.17.2
Initialize Data File
*1
Data files are shown.
*2
The selected data file is marked with “
-
“.
*3
The confirmation dialog is displayed.
*4
Selected data file is initialized.
Turn the power supply ON while pressing [TOP MENU] simultaneously Change the
security mode to management mode Select {FILE} under the top menu Select
{INITIALIZE} Select {FILE/GENERAL DATA}
*1
Select data file for initializing
*2
Press [ENTER]
*3
Select “YES”
*4
Operation
Explanation
INITIALIZE
TOOL DATA TOOL .CND
WEAVING DATA WEAV .CND
USER COODINATE DATA UFRAME .CND
VARIABLE DATA VAR .DAT
ARC START COND DATA ARCSRT .CND
ARC END COND DATA ARCEND .CND
ARC AUXILIARY COND DATA ARCSUP .DAT
WELDER CONDITION DATA WELDER .DAT
!Maintenance Mode
INITIALIZE
TOOL DATA TOOL .CND
WEAVING DATA WEAV .CND
USER COODINATE DATA UFRAME .CND
VARIABLE DATA VAR .DAT
ARC START COND DATA ARCSRT .CND
ARC END COND DATA ARCEND .CND
ARC AUXILIARY COND DATA ARCSUP .DAT
WELDER CONDITION DATA WELDER .DAT
!Maintenance Mode
File/Data marked by
"
can not be selected.
INITIALIZE
TOOL DATA TOOL .CND
WEAVING DATA WEAV .CND
USER COODINATE DATA UFRAME .CND
VARIABLE DATA VAR .DAT
ARC START COND DATA ARCSRT .CND
ARC END COND DATA ARCEND .CND
ARC AUXILIARY COND DATA ARCSUP .DAT
WELDER CONDITION DATA WELDER .DAT
!Maintenance Mode
Initialize?
YES
NO