7.5 General I/O Signal Assignment
7-49
*1
The operation origin cube and Cube 24 are same.
*2
This signal is not output during operation.
*3
This signal can be allocated to any general output signal at the I/O allocation display in
operation condition.
*4
This signal can be select “USE” or “NOT USE” by pseudo input signal ”822x”. If “NOT
USE” is selected, this signal can be used as general input signal.
Timer Cooling Water Error Validating
Gun Cooling Water Error Validating
Transthermo Error Validating
Low Air Pressure Validating
Weld ON/OFF Validating
7 6 5 4 3 2 1 0
0 0 0 1
1 1 1 1
Pseudo Input
Signal 822x
To Next Page
Loading...
