6.2 Wrist Flange
6-2
6.2
Wrist Flange
The wrist flange dimensions are shown in " Fig. 15 Wrist Flange ". In order to see the tram
marks, it is recommended that the attachment be mounted inside the fitting. Fitting depth of
inside and outside fittings must be 5mm or less.
Fig. 15 Wrist Flange
Wash off anti-corrosive paint (solid color) on the wrist flange surface with thinner or light oil
before mounting the tools.
Depth: 9mm
4-M6
×
P1.0
Depth: 9mm
Tram Mark
NOTE
To Next Page
Loading...
