YASKAWA YR-UP6-A00 - Initializing I;O Data

3.17 File Initialize
3-96
3.17.4
Initializing I/O Data
*1
The I/O data is shown.
*2
The selected data is marked with “
-
“.
*3
The confirmation dialog box is displayed.
*4
The selected data is initialized.
Turn the power supply ON while pressing [TOP MENU] simultaneously Change the
security mode to management mode Select {FILE} under the top menu Select
{INITIALIZE} Select {I/O DATA}
*1
Select data for initializing
*2
Press
[ENTER]
*3
Select “YES”
*4
Operation
Explanation
INITIALIZE
C IO PRGM CIOPRG .LST
IO NAME DATA IONAME .LST
SIMULATED IN DATA PSEUDOIN.DAT
!Maintenance Mode
INITIALIZE
C IO PRGM CIOPRG .LST
IO NAME DATA IONAME .LST
SIMULATED IN DATA PSEUDOIN.DAT
!Maintenance Mode
Parameters marked by
"
can not be selected.
INITIALIZE
C IO PRGM CIOPRG .LST
IO NAME DATA IONAME .LST
SIMULATED IN DATA PSEUDOIN.DAT
!Maintenance Mode
Initialize?
YES
NO