YASKAWA YR-UP6-A00 - Clearing the System Monitoring Time

5.3 System Monitoring Time
5-13
5.3.3
Clearing the System Monitoring Time
System monitoring times can be cleared and set back to 0 by following procedure. These
operations can be performed in the system monitoring time display, or in the individual dis-
plays.
*1
Confirmation dialog is displayed.
*2
The cumulative time value at the cursor line is reset to 0, and a new time measurement
begins.
Select the time to be cleared
*1
Select “YE
*2
Operation
Explanation
R1
S
C
L
DATA
EDIT DISPLAY UTILITY
SYS MONITORING TIME
CONTROL POWER TIME (1998/07/06 10:00 )
2 3 8 5 : 4 2 ' 0 2
SERVO POWER TIME (1998/07/06 10:30 )
2 3 8 0 : 1 0 ' 1 2
PLAYBACK TIME (1998/10/22 11:12 )
2 2 1 0 : 0 0 ' 2 0
MOVING TIME (1998/10/22 15:30 )
1 8 7 5 : 1 5 ' 3 0
OPERATING TIME (1998/10/22 16:12 )
!
Initialize?
MOVING TIME
NO
YES
R1
S
C
L
SYS MONITORING TIME
CONTROL POWER TIME (1998/07/06 10:00 )
2 3 8 5 : 4 2 ' 0 2
SERVO POWER TIME (1998/07/06 10:30 )
2 3 8 0 : 1 0 ' 1 2
PLAYBACK TIME (1998/10/22 11:12 )
2 2 1 0 : 0 0 ' 2 0
MOVING TIME (1998/10/22 15:30 )
0 : 0 0 ' 0 0
OPERATING TIME (1998/10/22 16:12 )
!
DATA
EDIT DISPLAY UTILITY