YASKAWA YR-UP6-A00 - Page 403

10.3 Alarm Message List
10-13
0951 CPU ERROR
(WRCA#2)
[Decimal Data]
An insertion error of the WRCA0#21 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0952 CPU ERROR
(WRCA#3)
[Decimal Data]
An insertion error of the WRCA01#3 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0953 CPU ERROR
(WRCA#4)
[Decimal Data]
An insertion error of the WRCA01#4 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board
fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0954 CPU ERROR
(WRCA#5)
[Decimal Data]
An insertion error of the WRCA01#5 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0955 CPU ERROR
(WRCA#6)
[Decimal Data]
An insertion error of the WRCA01#6 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0960 CPU HANG UP
ERROR
(WRCA#1)
[Decimal Data]
An insertion error of the WRCA01#1 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0961 CPU HANG UP
ERROR
(WRCA#2)
[Decimal Data]
An insertion error of the WRCA01#2 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0962 CPU HANG UP
ERROR
(WRCA#3)
[Decimal Data]
An insertion error of the WRCA01#3 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
0963 CPU HANG UP
ERROR
(WRCA#4)
[Decimal Data]
An insertion error of the WRCA01#4 circuit
board or defective circuit board.
• Insert the circuit board in the CPU rack
or the connector on the circuit board fast.
• Replace the circuit board.
• If the error occurs again, contact you
YASKAWA representative.
Alarm Message List
Alarm
Number
Message Cause Remedy