YASKAWA YR-UP6-A00 - Al-0010 (Cpu Board Insertion Error)

Continue normal operation.
Replace the CPU board.
Continue normal operation.
Continue normal operation.
The defective CPU board
caused the alarm.
Continue normal operation.
Continue normal operation.
The defective XBB01 circuit
board caused the alarm.
Contact your Yaskawa
representative.
An error occurs during the check of the CPU board.
No
Yes
Yes No
No Yes
Yes
No
NoYes
Alarm?
Alarm?
Alarm?
AL-0010 (CPU BOARD INSERTION ERROR)
Alarm?
Remove the corresponding
CPU board and remount it.
Remove the XCP01 circuit board and remount it. Continue normal operation.
No Yes
An alarm occurs.
Turn the power OFF and then ON.
Alarm?
Replace the XCP01 circuit board.
Replace the XBB01 circuit board.
Alarm?
8