YASKAWA YR-UP6-A00 - Al-0410 (Mode Change Error); Al-0500 (Segment Proc Not Ready)

AL-0410 (MODE CHANGE ERROR)
An error occurs during the internal control check.
AL-0500 (SEGMENT PROC NOT READY)
An error occurs during communications between the XCP01
circuit board and the WRCA01 circuit board.
Continue normal operation.
No
Yes
Alarm?
Contact your Yaskawa representative.
An alarm occurs.
Turn the power OFF and then ON.
Continue normal operation.
No
Yes
Alarm?
Contact your Yaskawa representative.
An alarm occurs.
Turn the power OFF and then ON.
18