YASKAWA YRC1000 - Page 41

HW1484764
Configuring Each Function
3-18
HW1484764
(7) Select {YES} on the confirmation dialog that appears.
Note: The following dialogs will be displayed depending on the system version. Always select {NO}
on all dialogs. If the dialog does not appear, proceed to step (8).
① Select {NO} on the confirmation dialog that appears.
② Select {NO} on the confirmation dialog that appears.
③ Select {NO} on the confirmation dialog that appears.
④ Select {NO} on the confirmation dialog that appears.
(8) Perform the procedures in steps (1) to (3) again.
(9) Select {FILE} - {INITIALIZE} under the main menu, and select "Safety Board FLASH Reset".
41/105