7 Concurrent I/O (Input/Output)
7.7 Block I/O
7-35
HW1485509
HW1485509
Pressing the configured {Block I/O: Tool #} (fig. 7-29 “Block I/O: Tool #
Button Successfully Linked with Tool” ) will open the Toggle Block I/O
panel (fig. 7-30 “Toggle Block I/O Panel”) where the following actions can
be performed:
– {Tool # → OFF/ON} - takes the user to the Block I/O screen to view
the contents of the setting that is linked to the active tool
– {TOGGLE OFF/ON} - executes the commands for the Active Tool's
respective OFF/ON state
– {ADD TO JOB} - adds the commands of a desired Block I/O state to
the current job at the position of the highlighted line above
– {Add Comments} - adds comments to the start and end of an
inserted Block I/O state when added to a job (fig. 7-31 “Add to Job
with Comments” ). This option is checked by default.
Fig. 7-30: Toggle Block I/O Panel
To Next Page
Loading...
