Need help?Do you have a question about the Yazoo/Kees ZMBI42180, ZMBI48180, ZMKW48170, ZMKW48190, ZMKW48210, ZMKW52230, ZMKH52230, ZMKW61230 and is the answer not in the manual?
General| Cutting Width (ZMBI42180) | 42 in |
|---|---|
| Cutting Width (ZMBI48180) | 48 in |
| Cutting Width (ZMKW48170) | 48 in |
| Cutting Width (ZMKW48190) | 48 in |
| Cutting Width (ZMKW48210) | 48 in |
| Cutting Width (ZMKW52230) | 52 in |
| Cutting Width (ZMKH52230) | 52 in |
| Cutting Width (ZMKW61230) | 61 in |
| Engine Power (ZMKW52230) | 2.3 kW |
| Engine Power (ZMKH52230) | 2.3 kW |
| Engine Power (ZMKW61230) | 2.3 kW |
Basic operational definitions and guidance for using the manual.
Guidelines for driving and transporting the machine on public roads.
Rules for operating the machine safely and by qualified personnel.
Explanation of hazard and information symbols used in the manual and on the machine.
Visual representations of safety precautions and warnings for machine operation.
Essential rules for safe operation, including operator awareness and hazard avoidance.
Defines operator duties and prohibits carrying passengers for safety.
Safety measures for lighting, terrain, operator condition, and traffic.
Guidance on essential personal protective equipment for safe operation.
Specific safety procedures and precautions for operating the machine on inclines.
Rules to prevent accidents involving children near the operating machine.
Safety steps for refueling and general maintenance procedures.
Guidelines for safe refueling, fuel storage, and leak prevention.
Precautions for handling battery acid and servicing the battery safely.
Safety tips for indoor use, debris removal, and fire risk reduction.
Procedures and warnings for safely loading, securing, and transporting the machine.
Illustration and labeling of the primary controls on the mower for user familiarity.
Steps for uncrating, assembling, and preparing the machine for initial use.
Procedure for setting the desired cutting height for the mower deck.
Instructions for ensuring the mower deck is properly leveled for optimal cutting.
Details on adjusting throttle tension and reverse spring detent.
Step-by-step guide for adjusting the park brake mechanism for different models.
Procedure for adjusting the motion control linkage for proper neutral and movement.
Steps for safely starting the engine and beginning operation.
Explanation of how motion control levers dictate direction and speed.
Guidance on straight movement, turning, and zero-turn techniques.
Information on the hour meter's function and service interval notifications.
Daily checks for engine oil, hydraulic fluid, and safety interlock system functionality.
Procedures for inspecting mower blades and lubricating cutter housings.
Checks for loose hardware, air filter service, and deck belt condition.
Guidelines for checking hydraulic oil level, leaks, and oil/filter changes.
Instructions for checking pump belts and identifying lubrication points.
Maintenance for caster wheels, fuel filter replacement, and winter storage.
Common causes and solutions when the engine fails to start.
Troubleshooting for problems with machine movement and blade engagement.
Addressing issues related to uneven cuts, ragged cuts, and machine vibration.
Diagram illustrating the wiring connections for the mower's console components.
Detailed schematic of the console wiring, showing component interconnections.
Diagram showing the wiring connections for the main frame components of the mower.
Detailed schematic of the frame wiring, illustrating component interconnections and routing.
To Next Page