Do you have a question about the Yazoo Commercial Front Cut Rider YHRK20 and is the answer not in the manual?
Category | Lawn Mower |
---|---|
Model | YHRK20 |
Engine Power | 20 HP |
Cutting Width | 48 inches |
Cutting Height | 1.5 - 4.5 inches |
Transmission | Hydrostatic |
Engine Type | Kawasaki OHV |
Speed Range | 0 - 8 mph |
Deck Material | Steel |
Protective guards for the belt system.
Mounting brackets for belt guards.
Ammeter, hour meter, and inclinometer gauges.
Throttle control, key switch, and choke.
Dashboard indicator warning lights.
The primary engine unit and mounting hardware.
Engine fuel pump and drive pulley.
Protective screen for engine air intake.
Hoses, adapters, and elbows for oil drainage.
Steering wheel, cover, and column parts.
Steering gear assembly and housing.
Steering shaft and associated bearings.
Parts for the steering linkage mechanism.
Steering arm collar and linkage rods.
Rear wheel hubs and axle shafts.
Assemblies for the front and rear wheels.
Fuel tank and its securing brackets and straps.
Fuel supply lines, hoses, and adapters.
Fuel filter unit and fuel tank cap.
Fuel valve and associated connection fittings.
Fuel filter and fuel supply lines.
Muffler unit and its attachment hardware.
Exhaust tailpipe and muffler sealing gasket.
Muffler, mounting flanges, and hose clamp.
Exhaust system gasket and fasteners.
Main lever assembly for blade engagement.
Switch and its mounting bracket for blade control.
Rod connecting lever to blade mechanism.
The tractor seat and its safety switch.
Bracket and spring for seat mounting and suspension.
Component related to rider weight.
Pedal and supporting pad for hydrostatic drive.
Switch and cable for transmission neutral.
Assembly for controlling forward and reverse motion.
Traction pedal, oil filter, and hose adapters.
Yoke, rod, bracket, and park brake parts.
Complete wheel and tire units.
Park brake components and motor pulley.
PTO belt, shaft, and pulley assembly.
Manual and hydraulic lift transaxle units.
Idler arm, tension spring, and hub bearing.
PTO pulley, belt, and associated hardware.
Frame parts supporting the belt drive system.
Idler arm, tension spring, and pulley bushing.
Hub bearing and PTO pulley assembly.
PTO belt and associated drive parts.
Cylinder assembly, hoses, and fittings.
Control valves and lift lever linkage.
Parking brake lever assembly and adjustment parts.
Brake shoes, linings, and pin retainers.
Gears, bearings, and internal drive shafts.
Spacers, bushings, case gasket, and plugs.
Axle housings, differential bearings, and axle seals.
Differential unit, spacers, and drive wheel hub.
Axle shaft and Woodruff key.
Transmission shafts, lip seals, and ball bearings.
Thrust plates, gaskets, and various repair kits.
Gerotor assembly and charge pump shims.
Electrical wire harness and control modules.
Switches, relays, and starter solenoid.
Battery cables and associated connectors.
Lift lever, grip, and cable roller.
Clamp, lever spring, and spacer.
Labels providing operational warnings and cautions.
Labels indicating significant dangers and hazards.
Decals identifying product model and HP.
Procedure for acquiring warranty service.
Exclusions and conditions that limit warranty coverage.
Statements on other warranties and damage limitations.