| Yealink USB Connect | 20
Manually Pair Headset with BT51
The BT51 dongle of the BH71 Pro has been pre-paired with the headset and is ready for use. If you want
to pair the BT51 dongle with another headset, or a separately purchased the BT51 dongle pairs with the
headset, it needs to be paired through Yealink USB Connect.
Before you begin
Make sure that the headset is in Bluetooth pairing mode.
Procedure
1. Select BT51 dongle device CARD.
2. Click Device Settings.
3.
In the Pairable devices List field, click to search the pairable device.
4. Find the desired device and click Start pairing.
Note:
• One BT51 dongle can only save one headset pairing information.
• If you want to pair the BT51 dongle with a new headset, you need to unpair the old headset
first.
• If you want to pair the headset with a new BT51 dongle, you need to make the headset enter
the pairing mode. Then search for the headset on the new BT51 dongle through the Yealink
USB Connect and connect it.
Related information
Enter Headset into Pairing Mode
Update Firmware
To Next Page
Loading...
