Yealink CP860 - Page 114

Administrator’s Guide for CP860 IP conference phones
102
Parameters
Permitted Values
Default
Description:
Enables or disables live dialpad feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will automatically dial out the entered phone
number in the pre-dialing screen without pressing a send key.
Web User Interface:
Settings->Preference->Live Dialpad
Phone User Interface:
None
phone_setting.inter_digit_time
Integer from 1 to 14
4
Description:
Configures the time (in seconds) for the IP phone to automatically dial out the
entered digits without pressing a send key.
Note: It works only if the parameter “phone_setting.predial_autodial” is set to 1
(Enabled).
Web User Interface:
Settings->Preference->Inter Digit Time (1~14s)
Phone User Interface:
None
To configure live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select the desired value from the pull-down list of Live Dialpad.