Yealink CP860 - Page 161

Configuring Basic Features
149
Parameters
Permitted Values
Default
Description:
Enables or disables the IP phone to complete the blind transfer through pressing the
on-hook key instead of pressing the Tran soft key.
0-Disabled
1-Enabled
Web User Interface:
Features->Transfer->Blind Transfer On Hook
Phone User Interface:
None
transfer.on_hook_trans_enable
0 or 1
1
Description:
Enables or disables the IP phone to complete the semi-attended/attended transfer
through pressing the on-hook key instead of pressing the Tran soft key.
0-Disabled
1-Enabled
Web User Interface:
Features->Transfer->Semi-Attend Transfer On Hook
Phone User Interface:
None
transfer.semi_attend_tran_enable
0 or 1
1
Description:
Enables or disables the transferee party’s phone to prompt a missed call on the LCD
screen before displaying the caller ID when performing a semi-attended transfer.
0-Enabled
1-Disabled
Web User Interface:
Features->Transfer->Semi-Attended Transfer
Phone User Interface:
None
To configure call transfer via web user interface:
1. Click on Features->Transfer.