Configuring Basic Features
153
Details of the Configuration Parameter:
transfer.tran_others_after_conf_enable
Description:
Enables or disables the IP phone to transfer the local conference call to the two
parties after the conference initiator drops the local conference call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the other two parties remain connected when the
conference initiator drops the conference call.
Note: It is only applicable to the local conference.
Web User Interface:
Features->Transfer->Transfer on Conference Hang up
Phone User Interface:
None
To configure Transfer on Conference Hang up via web user interface:
1. Click on Features->Transfer.
2. Select the desired value from the pull-down list of Transfer on Conference Hang
up.
3. Click Confirm to accept the change.
Directed call pickup is used for picking up an incoming call on a specific extension. A
user can pick up the incoming call by pressing the DPickup soft key. This feature
To Next Page
Loading...
