Yealink CP860 - Page 167

Configuring Basic Features
155
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.pickup.direct_pickup_enable
0 or 1
0
Description:
Enables or disables the IP phone to display the DPickup soft key when the IP phone is
in the pre-dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Directed Call Pickup
Phone User Interface:
None
features.pickup.direct_pickup_code
String within 32 characters
Blank
Description:
Configures the directed call pickup code on a phone basis.
Example:
features.pickup.direct_pickup_code = *97
Note: The directed call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.
Web User Interface:
Features->Call Pickup->Directed Call Pickup Code
Phone User Interface:
None
account.X.direct_pickup_code
(X = 1)
String within 32 characters
Blank
Description :
Configures the directed call pickup code on a per-line basis.
Example:
account.1.direct_pickup_code = *68
Note: The directed call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.
Web User Interface: