Yealink CP860 - Page 180

Administrator’s Guide for CP860 IP conference phones
168
Parameters
Permitted Values
Default
(X = 1)
Description:
Configures the DTMF info type when the DTMF type is configured as “SIP INFO”,
“AUTO or SIP INFO”.
0-Disabled
1-DTMF-Relay
2-DTMF
3-Telephone-Event
Web User Interface:
Account->Advanced->DTMF Info Type
Phone User Interface:
None
features.dtmf.repetition
1, 2 or 3
3
Description:
Configures the repetition times for the IP phone to send the end RTP EVENT packet
during an active call.
Web User Interface:
Features->General Information->DTMF Repetition
Phone User Interface:
None
To configure the method of transmitting DTMF digits via web user interface:
1. Click on Account-> Advanced.
2. Select the desired value from the pull-down list of DTMF Type.
If SIP INFO or AUTO or SIP INFO is selected, select the desired value from the
pull-down list of DTMF Info Type.