Yealink CP860 - Page 200

Administrator’s Guide for CP860 IP conference phones
188
Procedure
Tones can be configured using the configuration files or locally.
Configuration File
y000000000037.cfg
Configure the tones for the IP
phone.
Parameters:
voice.tone.country
voice.tone.dial
voice.tone.ring
voice.tone.busy
voice.tone.congestion
voice.tone.callwaiting
voice.tone.dialrecall
voice.tone.info
voice.tone.stutter
voice.tone.autoanswer
Local
Web User Interface
Configure the tones for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-tones&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
voice.tone.country
Refer to the following content
Custom
Description:
Configures the country tone for the IP phone.
Example:
voice.tone.country = Custom
Permitted Values:
Custom, Australia, Austria, Brazil, Belgium, China, Czech, Denmark, Finland, France,
Germany, Great Britain, Greece, Hungary, Lithuania, India, Italy, Japan, Mexico,
New Zealand, Netherlands, Norway, Portugal, Spain, Switzerland, Sweden, Russia,
United States, Chile, Czech ETSI
Web User Interface:
Settings->Tones->Select Country