Yealink CP860 - Page 250

Administrator’s Guide for CP860 IP conference phones
238
Parameters
Permitted Values
Default
1-Enabled
Web User Interface:
None
Phone User Interface:
None
To configure server redundancy for fallback purpose via web user interface:
1. Click on Account->Register.
2. Configure registration parameters of the account in the corresponding fields.
3. Select the desired value from the pull-down list of Transport.
4. Configure parameters of SIP server 1 and SIP server 2 in the corresponding fields.
5. Click Confirm to accept the change.
To configure server redundancy for failover purpose via web user interface:
1. Click on Account->Register.
2. Configure registration parameters of the account in the corresponding fields.
3. Select DNS-NAPTR from the pull-down list of Transport.