Configuring Audio Features
297
To configure the codecs and adjust the priority of the enabled codecs on a per-line
basis via web user interface:
1. Click on Account->Codec.
2. Select the desired codec from the Disable Codecs column and click .
The selected codec appears in the Enable Codecs column.
3. Repeat the step 2 to add more codecs to the Enable Codecs column.
4. Click to remove the codec from the Enable Codecs column.
5. Click or to adjust the priority of the enabled codecs.
6. Click Confirm to accept the change.
To configure the Ptime via web user interface:
1. Click on Account->Advanced.
2. Select the desired value from the pull-down list of PTime (ms).
3. Click Confirm to accept the change.
To Next Page
Loading...
