Yealink CP860 - Page 312

Administrator’s Guide for CP860 IP conference phones
300
voice.vad
Local
Web User Interface
Configure VAD.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-voice&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
voice.vad
0 or 1
0
Description:
Enables or disables VAD (Voice Activity Detection) feature on the IP phone.
0-Disabled
1-Enabled
Web User Interface:
Settings->Voice->Echo Cancellation->VAD
Phone User Interface:
None
To configure VAD via web user interface:
1. Click on Settings->Voice.
2. Select the desired value from the pull-down list of VAD.
3. Click Confirm to accept the change.