Yealink CP860 - Page 332

Administrator’s Guide for CP860 IP conference phones
320
Parameters
Permitted Values
Default
If it is set to 1 (Enabled), the IP phone will download y000000000037_Security.enc
and <MAC_Security>.enc files during auto provisioning, and then decrypts these
files into the plaintext keys (e.g., key2, key3) respectively using the phone built-in key
(e.g., key1). The IP phone then decrypts the encrypted configuration files using
corresponding key (e.g., key2, key3).
If it is set to 0 (Disabled), the IP phone will decrypt the encrypted configuration files
using plaintext AES keys configured on the IP phone.
Web User Interface:
None
Phone User Interface:
None
auto_provision.aes_key_16.com
16 characters
Blank
Description:
Configures the plaintext AES key for decrypting the Common CFG file.
The valid characters contain: 0 ~ 9, A ~ Z, a ~ z.
Example:
auto_provision.aes_key_16.com = 0123456789abcdef
Note: It works only if the parameter “auto_provision.aes_key_in_file” is set to 0
(Disabled).
Web User Interface:
Settings->Auto Provision->Common AES Key
Phone User Interface:
None
auto_provision.aes_key_16.mac
16 characters
Blank
Description:
Configures the plaintext AES key for decrypting the MAC-Oriented CFG file.
The valid characters contain: 0 ~ 9, A ~ Z, a ~ z.
Example:
auto_provision.aes_key_16.mac = 0123456789abmins
Note: It works only if the parameter “auto_provision.aes_key_in_file” is set to 0
(Disabled).
Web User Interface:
Settings->Auto Provision->MAC-Oriented AES Key