Yealink CP860 - Page 34

Administrator’s Guide for CP860 IP conference phones
22
Parameters
Permitted Values
Default
Description:
Configures the primary IPv4 DNS server when the static IPv4 DNS is enabled.
Example:
network.primary_dns = 202.101.103.55
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Primary DNS
Phone User Interface:
Menu->Settings->Advanced Settings (Default password: admin) ->Network->WAN
Port->IPv4->Static IPv4 Client->Primary DNS
network.secondary_dns
IPv4 Address
Blank
Description:
Configures the secondary IPv4 DNS server when the static IPv4 DNS is enabled.
Example:
network.secondary_dns = 202.101.103.54
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->Secondary DNS
Phone User Interface:
Menu->Settings->Advanced Settings (Default password: admin) ->Network->WAN
Port->IPv4->Static IPv4 Client ->Secondary DNS
To configure DHCP via web user interface:
1. Click on Network->Basic.