To configure the system log level via web user interface:
1. Click on Settings->Configuration.
2. Select 6 from the pull-down list of System Log Level.
3. Click Confirm to accept the change.
A dialog box pops up to prompt “Do you want to restart your machine?”. The
configuration will take effect after a reboot.
4. Click OK to reboot the phone.
After a reboot, the system log level is set as 6, the informational level.
Note
To configure the phone to export the system log to a syslog server via web user
interface:
1.
Click on Settings->Configuration.
2.
Mark the Server radio box in the Export System Log field.
Informational level may make some sensitive information accessible (e.g., password-dial
number), we recommend that you reset the system log level to 3 after providing the
syslog file.
To Next Page
Loading...
