Yealink CP860 - Contrast; Backlight

Administrator’s Guide for CP860 IP conference phones
26
Parameters
Permitted Values
Default
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4&IPv6
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->Internet Port->Mode (IPv4/IPv6)
Phone User Interface:
Menu->Settings->Advanced Settings (Default password: admin) ->Network->WAN
Port ->IP Mode
network.internet_port.ip
IPv4 Address
Blank
Description:
Configures the IPv4 address when the IP address mode is configured as IPv4 or
IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP
Address.
Example:
network.internet_port.ip = 192.168.1.20
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (Default password: admin) ->Network->WAN
Port ->IPv4->Static IPv4 Client->IPv4 Address
network.internet_port.mask
Subnet Mask
Blank
Description:
Configures the IPv4 subnet mask when the IP address mode is configured as IPv4 or
IPv4&IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP
Address.
Example:
network.internet_port.mask = 255.255.255.0
Note: If you change this parameter, the IP phone will reboot to make the change take