Yealink CP860 - Page 49

Getting Started
37
Parameters
Permitted Values
Default
provisioning process every Sunday and Monday.
Note: It works only if the parameter “auto_provision.weekly.enable” is set to
1(Enabled).
Web User Interface:
Settings->Auto provision->Day of week
Phone User Interface:
None
firmware.url
URL within 511 characters
Blank
Description:
Configures the access URL of the firmware file.
Example：
firmware.url = http://192.168.1.20/2.71.0.140.rom
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Upgrade->Select and Upgrade Firmware
Phone User Interface:
None
To configure the way for the IP phone to check for new configuration files via web user
interface:
1. Click on Settings->Auto Provision.