Yealink CP860 - Page 65

Configuring Basic Features
53
To configure phone lock via web user interface:
1. Click on Features->Phone Lock.
2. Select the desired type from the pull-down list of Keypad Lock Enable.
3. Select the desired type from the pull-down list of Keypad Lock Type.
4. Enter unlock PIN (numeric characters) in the phone Unlock PIN (0~15 Digit) field.
5. Enter the desired time in the phone Lock Time Out (0~3600s) field.
6. Click Confirm to accept the change.
To configure a keypad lock key via web user interface:
1. Click on DSSKey->Programable Key.
2. In the desired programable key field, select Keypad Lock from the pull-down list of
Type.
3. Click Confirm to accept the change.
To configure phone lock type via phone user interface:
1. Press Menu->Settings->Advanced Settings (Default password: admin) ->Keypad
Lock.
2. Press the or soft key to select the desired value from the Keypad Lock Enable
field.