Yealink CP860 - Page 73

Configuring Basic Features
61
Parameters
Permitted Values
Default
local_time.offset_time
Integer from -300 to 300
Blank
Description:
Configures the offset time (in minutes) of DST.
Note: It works only if the parameter “local_time.summer_time” is set to 1 (Enabled).
Web User Interface:
Settings->Time & Date->Offset (minutes)
Phone User Interface:
None
local_time.manual_time_enable
0 or 1
0
Description:
Configures the IP phone to obtain time from the NTP server or manual settings.
0-NTP
1-Manual
Web User Interface:
Settings->Time & Date->Manual Time
Phone User Interface:
None
local_time.time_format
0 or 1
1
Description:
Configures the time format.
0-12 Hour
1-24 Hour
If it is set to 0 (12 Hour), the time will be displayed in 12-hour format with AM or PM
specified.
If it is set to 1 (24 Hour), the time will be displayed in 24-hour format (e.g., 2:00 PM
displays as 14:00).
Web User Interface:
Settings-> Time & Date->Time Format
Phone User Interface:
Menu->Settings->Basic Settings->Time & Date ->Time & Date Format->Time Format
local_time.date_format
0, 1, 2, 3, 4, 5 or 6
0