Yealink CP860 - Network Conference

Using Your Phone with SIP/Cloud Account
89
Network Conference
You can use network conference on the CP860 IP conference phone to conduct a conference
with multiple participants.
This feature allows you to perform the following:
 Join two calls together into a conference call.
 Invite another party into an active conference call.
 Remove a specific conference party.
To use this feature, contact your system administrator for the network conference URI in
advance.
To configure network conference via web user interface:
1. Click on Account->Advanced.
2. Select Network Conference from the pull-down list of Conference Type.
3. Enter the conference URI (e.g., conference@example.com) in the Conference URI field.
4. Click Confirm to accept the change.
Note
To set up a network conference call:
1. Place a call to the first party.
2. Press the Conf soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and then press , , or the Send soft
Network conference is configurable via web user interface only.