Yealink CP860 - Auto Redial

User Guide for the CP860 HD IP Conference Phone
76
To configure auto answer and auto answer mute via phone user interface:
1. Press Menu->Features->Auto Answer.
2. Press to select Status, and then press the or soft key to select Enabled from the
Status field.
3. Press the or soft key to select Enabled from the Auto Answer Mute field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto Redial
You can enable auto redial to automatically redial a phone number when the called party is busy.
You can also configure the number of auto redial attempts and the time to wait between redial
attempts.
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press the or soft key to select Enabled from the Auto Redial field.
3. Enter the desired time (in seconds) in the Redial Interval field.
The default time interval is “10”.
4. Enter the desired number of redial attempts in the Redial Times field.
The default value is “10”.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General Information.
Auto answer is only applicable when there is no other call in progress on the phone.